Portable 12V Car Jump Starter and Tyre Inflator, 6000mAh, Digital Display and LED Light
Premium Gift · Car & Road Trip
A flat battery and a soft tyre, sorted from the glovebox
A compact 12V jump starter with a tyre inflator built in. Set the pressure on the screen and it stops when it gets there.

ABS body with a 304 stainless steel hose connector and a round digital pressure display.

Jump leads that clip on and go
The jump leads plug into the side of the unit and clamp onto a 12V car battery.
It holds a 6000mAh charge, so it can sit in the boot until the morning the car won't turn over.

Set the number and walk away
Dial in the pressure you want with the plus and minus buttons and the inflator stops on its own when it reaches it.
The screen reads in PSI, Bar, kPa or kg/cm², up to 150 PSI.

A torch for the side of the road
The LED light on the end turns on from its own button, for changing a tyre or finding the clamps after dark.
There is a USB output too, so it can top up a phone.

A Monday morning in a Ballarat winter
Frost on the windscreen, the car silent, and work in forty minutes. Clip the leads on, turn the key, and get going.
On the way home, top up the tyres that went soft in the cold.

Small enough for the door pocket
At 19.3 x 8.5 x 6.2 cm it fits in a glovebox or a door pocket, and the leads and adaptors go in the drawstring pouch shown in the photos.
It recharges through a USB-C port.
A closer look


Who it suits
For anyone who'd rather not wait by the road
Specifications
What's in the box
- 1 x jump starter with air compressor
- 1 x accessory set, as pictured: jump leads with clamps, inflation hose, USB charging cable, valve adaptor and nozzles, drawstring pouch
Why this one
The kind of thing you forget is in the boot until the one morning you need it.